| Research Publications |
- Kumar, A. Raj, G. Janardhana Raju, and K. Hemachandra Reddy. "Experimental investigation of in-cylinder air flow to optimize number of helical guide vanes to enhance DI diesel engine performance using mamey sapote biodiesel." IOP Conference Series: Materials Science and Engineering. Vol. 330. No. 1. IOP Publishing, 2018.
-
- A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Experimental Investigation of in-Cylinder Air Flow in A Diesel Engine with Close Coiled Air intake Manifold” International Journal of Advance Research and Innovative Ideas in Education, IJARIIE-ISSN(O)-2395-4396, Vol-2 Issue-2 2017, pp:163-174.
-
- A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Experimental Investigation On DI Diesel Engine With Nickel-Chromium Coated Piston Using Mamey Sapote Biodiesel” International Journal of Advance Research and Innovative Ideas in Education, IJARIIE-ISSN(O)-2395-4396, Vol-2 Issue-2 2017, pp:188-195.
-
- A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Experimental Investigation of in-Cylinder Air Flow to Optimize the Number of Guide Vanes to Improve Performance And Emissions of DI Diesel Engine”. International Journal of Information and Research and Review (IJIRR), Vol.3, Issue 9. September 2016, pp: 2800-2805.
-
- A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Performance And Emission Analysis of Mamey Sapote Biodiesel With SC 5D Polymer Additive”. Elixir International Journal, Vol.94, 26th May 2016, pp: 40565-40569.
-
- Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Biodiesel Production by Alkaline Transesterification Of Mamey Sapote Oil” International Journal for Research in Applied Science & Engineering Technology. (IJRASET), Vol. 4, No. I January 2016, pp. 391-396.
-
- A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Comparison of Swirl, Turbulence Generating Devices in Compression Ignition Engines.” Archives of Applied Science Research (AASR), Vol.8, Issue 7, pp: 31-40.
-
- Raj Kumar, Dr. G. Janardhana Raju , Dr. Hemachandra Reddy,”Performance and Emission Analysis of Mamey Sapote Biodiesel with Swirl Generation Technique in Intake Manifold of Diesel Engine”, International Journal of Core Engineering & Management, ISSN:2348-9510(online)Volume.1,Issue: Dec 2015.pp. 22-29.
-
- A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Emission And Performance Characteristics of Diesel Engine Using Mamey Sapote Biodiesel As Alternative Fuel” International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET) Vol.4, No. 7, July 2015, pp. 6589-6597.
-
- A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Performance Evaluation of a Diesel Engine in the Presence of A Convergent Nozzle With Internal Blades in the Air Intake Manifold”. International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET) Vol.4, No. 7, July 2015, pp. 6597-6606.
-
- Raj Kumar, Dr. G. Janardhana Raju , Dr. Hemachandra Reddy, M. Chakrapani, “Experimental investigation of an Air enhancement device on the performance of a performance of a compression ignition engine”, Journal of Material science and Mechanical Engineering(JMSME),Vol2,No.5,April-june 2015,pp.471-475.
-
- G. Janardhana Raju, K. Srinivasulu Reddy and N. Venkatachalapathi, ” Dynamic Modeling of Landing impact isolator for aero plane”, Journal of Basic and applied Engineering Research(JBAER)Vol.2, No.7,April-June 2015. Pp .600-603.
-
- Rajkumar,G. Janardhana Raju,Govind Mule,” Optimization of air brake System using rotary compressor in Locomotives”, International Journal for Research in Applied sciences & Engineering Technology(IJRASET), Vol.3, issue IV,April 2015, pp.150-154.
-
- Venkata Vishnu, G. Janardhana Raju, G. Guruvaiah Naidu, “ Optimization of different Process parameters of Aluminium Alloy 6351 in CNC Milling using TAGUCHI Method”, International Journal of Engineering Research and General Science (IJERGS), ISSN 2091-2730, Vol. 3, Issue. 2, 2015,pp. 407-413.
-
- G. Janardhana Raju, K.Srinivasulu Reddy, N.Venkatachalapathi, “Design Evolution of Drive Booster Configuration for Terrain Vehicles”, International Journal of Vehicle Structures & Systems(IJVSS), Vol.7, Issue.1 , 2015, ISSN:0975-540(Online) 0975-3060(Print), pp.40-43.
-
- G.Guruvaiah Naidu, A.Venkata Vishnu, Dr.G.Janardhana Raju “Optimization of Process Parameters for Surface Roughness in Milling of En-31 Steel Material Using Taguchi Robust Design Methodology”.International Journal of Mechanical and Production Engineering (IJMPE) ISSN: 2320-2092, Volume- 2, Issue-9, Sept.-2014.
-
- Mr. A. Raj Kumar, Mr. M. Chakrapani, Dr. G. Janardhana Raju, Dr. Hemachandra Reddy, “Evaluation of C.I Enginer Performance and Emission Characteristics Fueled with Cng and Ethanol Blends as Alternative Fuel”, International Journal for Research in Applied Science and Engineering Technology (IJRASET), Vol. 2 Issue VIII, August, 2014, ISSN: 2321-9653.
-
- Raj Kumar, Dr. G. Janardhana Raju, Dr. K. Hemachandra Reddy , “Effect of Exhaust Gas Recirculation on the performance of Diesel Engine with Iso – Butanol blends”, International Journal of Application or Innovation In Engineering & Management, ISSN 2319 -4847,Vol.4, Special Issue, March 2014,pp. 1-5.
-
- Raj Kumar, Dr. G. Janardhana Raju, Dr. K. Hemachandra Reddy, “The effect of Iso - butanol Diesel Blends on Duel Fuel Biogas and Diesel Blends Engine Performance” International Journal for Advance Research in Engineering and Technology, vol.2, Issue 1, Jan 2014 ISSN 2320-6802, pp. 22-30.
-
- P. Anjani Vishnu Vardhini, T.V.V.S.N. Murti, Dr. G.Janardhana Raju, “Structural Design of Automated Freight Loading System”, International Journal of Technology and Engineering Science (IJTES), Vol 1 (4), pp 328 – 332, July 2013.
-
- Raj Kumar, Dr. G. Janardhana Raju, Dr. G. amarender Rao, “Heat Transfer Analysis In the Cylinder Head of a Four Stroke SI Engine”, International Journal of Engineering Research and Technology, vol.2, Issue 5, May 2013, ISSN 2278-0181 , pp. 645-652.
-
- Dr. A. Jawahar Babu, Dr. G. Janardhana Raju, Dr.S. Viswanath Raju,“A Decision Making Tool for Dynamic Scheduling of Jobshop Problem”, International Journal on Advanced computing, Vol. 2, Issue 1, Jan 2010.
-
- G. Janardhana Raju, D. Ravikanth, Dr. C. Subba Rao,, Dr. G. Ranga Janardhana “A Case Study on Maintenance Executive Information system in a Thermal Power Plant” Industrial Engineering Journal, Vol. XXXV NO. 1, January 2006.
-
|
| FDP and Workshops |
- One week program on “Matlab Based Machine Learning and Optimization” from May 28th May to 01st June 2018, Organised by Department of Mechanical Engineering, Motilal Nehru National Institute of Technology, Allahabad, UP State.
-
- One Week Induction / Refresher Programme on “ Intellectual Property Rights & Innovations” from 27th Nov. to 02nd Dec. 2017 organized by Nalla Narasimha Reddy Education Society’s Group of Institutions , Hyderabad.
-
- Awareness Workshop on “ Outcome Based Education and Accreditation “ on 14th September 2015 , organized by National Board of Accreditation and Jawaharlal Nehru Technological University Hyderabad at JNTU Hyderabad.
-
- One week program on “Knowledge based systems in engineering”, 10th June to 14th June 2013, Organised by Osmania University, Hyderabad.
-
- Two Day “ Indo American Education Summit and Expo 2013” , 2 and 3 Feb. 2013, Organised by the Indus Foundation in Hyderabad.
-
- Short - Term Program on “Modelling, Analysis and control of Mechatronic Systems”,
27-29th July 2012, Organised by NIT Warangal.
-
- One week program on “Knowledge based systems in engineering”, 10th June to 14th June 2013, Organised by Osmania University, Hyderabad.
-
- Short - Term Program on “Modelling, Analysis and control of Mechatronic Systems”, 27-29th July 2012, Organised by NIT Warangal.
-
- One week Short - Term Program on “Enterprise Resource Systems”, 18th - 22 June 2012, organized by IIT Kanpur.
-
- One week program on “Teaching skills” organized by Mission 10 X, WIPRO at Guru Nanak Engineering College, 23 May to 27 may 2011.
-
- Work shop on “Educational Innovations”, 21st-22nd November 2006, organised by VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad.
-
- “Research Methodology & Report Writing”, 25th & 26th, June,2003, organised by Osmania University College of Engg., Osmania University,Hyderabad.
-
- Two week Short term Program, “Instruction Design & Delivery-II”, 17th to 28th March,2003, organized by TechnicalTeachers Training Institute(TTTI),Taramani, Chennai.
-
- Two week Short term Program, “Computer Integrated Manufacturing”, 12th to 24th August, 2002, organised by Bapuji Institute of Engineering & Technology, Davangere.
-
|
