loading

Mechanical Engineering

Mechanical HOD Profile

DR. G. JANARDHANA RAJU, DEAN - SOE, HEAD OF THE DEPARTMENT

 Mr. THIMMARAJU PAVAN KUMAR
Date of Joining09-07-2011
Qualification M.Tech, Ph.D.
Email Id deansoe@nnrg.edu.in
Teaching Experience Total 19 Years

I) July 9th 2011 to Till Date – Dean, School of Engineering, Professor and Head Mechanical Engineering , Nalla Narasimha Reddy Group of Institutions,Hyderabad.

II) Nov. 2008 to July 8th 2011 - Professor and Head , Department of Mechanical Engineering, Guru Nanak Engineering College, Hyderabad.

III)April 2007 to Oct 2008 - SAP Consultant – MM in SAT Infotech, Hyderabad.

IV) 05th Oct,2006 to March 2007 - Associate Professor, Mech. Engg.,Dept.,VNRVJIET Bachupally , Hyderabad.

V) Oct.13th 1999 to 04th Oct. 2006 - Assistant Professor, Industrial and Production Engineering.Dept., KSRMCE Kadapa.
Education Information

I) Ph.D.(Industrial Engineering ) JNTU, Hyderabad, May 2006.

II) M.Tech.(Industrial Engineering), SVUniversity College of Engineering, Tirupathi, June, 1999.

III) B.Tech. (Mechanical Engineering) with first class from KSRMCE, Kadapa, (Sri Venkateswara University), Tirupathi, May 1996.
AchievementsI) Chairman, ISTE Professional Chapter from 2014 to till date, Nalla Narasimha Reddy Education Societys Group of Institutions, Hyderabad.

II) Convener for National level Technical Fest, Tech-Samprathi- 2K16, 2k15, 2k14, 2k13 and 2k12 Organized by NNRES, Hyderabad.

III) Editorial Member, Institute of Engineers (India) from 2004 to 2006, Kadapa local centre, Kadapa.

IV) Executive Committee Member, Institution of Engineers (India) Cuddapah Local Center from April 2003 to Oct. 2006.

V) ISTE Secretary for faculty chapter for the academic year 2005-2006 at KSRM College of Engineering Kadapa.

VI) Co-Coordinator for National Seminar: ZEITGEIST-2004, Organized by KSRM College of Engineering, Kadapa on 07th January 2004.
FDPs/ Work Shops attendedI)One week program on “Matlab Based Machine Learning and Optimization” from May 28th May to 01st June 2018, Organised by Department of Mechanical Engineering, Motilal Nehru National Institute of Technology, Allahabad, UP State.


II)One Week Induction / Refresher Programme on “ Intellectual Property Rights & Innovations” from 27th Nov. to 02nd Dec. 2017 organized by Nalla Narasimha Reddy Education Society’s Group of Institutions , Hyderabad.

III)Awareness Workshop on “ Outcome Based Education and Accreditation “ on 14th September 2015 , organized by National Board of Accreditation and Jawaharlal Nehru Technological University Hyderabad at JNTU Hyderabad.

IV)One week program on “Knowledge based systems in engineering”, 10th June to 14th June 2013, Organised by Osmania University, Hyderabad.

V)Two Day “ Indo American Education Summit and Expo 2013” , 2 and 3 Feb. 2013, Organised by the Indus Foundation in Hyderabad.


VI)Short - Term Program on “Modelling, Analysis and control of Mechatronic Systems”,
27-29th July 2012, Organised by NIT Warangal.

VII) One week program on “Knowledge based systems in engineering”, 10th June to 14th June 2013, Organised by Osmania University, Hyderabad.


VIII) Short - Term Program on “Modelling, Analysis and control of Mechatronic Systems”, 27-29th July 2012, Organised by NIT Warangal.


IX)One week Short - Term Program on “Enterprise Resource Systems”, 18th - 22 June 2012, organized by IIT Kanpur.

X) One week program on “Teaching skills” organized by Mission 10 X, WIPRO at Guru Nanak Engineering College, 23 May to 27 may 2011.

XI)Work shop on “Educational Innovations”, 21st-22nd November 2006, organised by VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad-500072.

XII)“Research Methodology & Report Writing”, 25th & 26th, June,2003, organised by Osmania University College of Engg., Osmania University,Hyderabad.

XIII)Two week Short term Program, “Instruction Design & Delivery-II”, 17th to 28th March,2003, organized by TechnicalTeachers Training Institute(TTTI),Taramani, Chennai.

XIV)Two week Short term Program, “Computer Integrated Manufacturing”, 12th to 24th August, 2002, organised by Bapuji Institute of Engineering & Technology, Davangere.
JournalsI.Kumar, A. Raj, G. Janardhana Raju, and K. Hemachandra Reddy. "Experimental investigation of in-cylinder air flow to optimize number of helical guide vanes to enhance DI diesel engine performance using mamey sapote biodiesel." IOP Conference Series: Materials Science and Engineering. Vol. 330. No. 1. IOP Publishing, 2018.

II.A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Experimental Investigation of in-Cylinder Air Flow in A Diesel Engine with Close Coiled Air intake Manifold” International Journal of Advance Research and Innovative Ideas in Education, IJARIIE-ISSN(O)-2395-4396, Vol-2 Issue-2 2017, pp:163-174.

III.A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Experimental Investigation On DI Diesel Engine With Nickel-Chromium Coated Piston Using Mamey Sapote Biodiesel” International Journal of Advance Research and Innovative Ideas in Education, IJARIIE-ISSN(O)-2395-4396, Vol-2 Issue-2 2017, pp:188-195.


IV.A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Experimental Investigation of in-Cylinder Air Flow to Optimize the Number of Guide Vanes to Improve Performance And Emissions of DI Diesel Engine”. International Journal of Information and Research and Review (IJIRR), Vol.3, Issue 9. September 2016, pp: 2800-2805.

V.A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Performance And Emission Analysis of Mamey Sapote Biodiesel With SC 5D Polymer Additive”. Elixir International Journal, Vol.94, 26th May 2016, pp: 40565-40569.


VI.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Biodiesel Production by Alkaline Transesterification Of Mamey Sapote Oil” International Journal for Research in Applied Science & Engineering Technology. (IJRASET), Vol. 4, No. I January 2016, pp. 391-396.


VII.A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Comparison of Swirl, Turbulence Generating Devices in Compression Ignition Engines.” Archives of Applied Science Research (AASR), Vol.8, Issue 7, pp: 31-40.

VIII.Raj Kumar, Dr. G. Janardhana Raju , Dr. Hemachandra Reddy,”Performance and Emission Analysis of Mamey Sapote Biodiesel with Swirl Generation Technique in Intake Manifold of Diesel Engine”, International Journal of Core Engineering & Management, ISSN:2348-9510(online)Volume.1,Issue: Dec 2015.pp. 22-29.

IX.A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Emission And Performance Characteristics of Diesel Engine Using Mamey Sapote Biodiesel As Alternative Fuel” International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET) Vol.4, No. 7, July 2015, pp. 6589-6597.


X.A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Performance Evaluation of a Diesel Engine in the Presence of A Convergent Nozzle With Internal Blades in the Air Intake Manifold”. International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET) Vol.4, No. 7, July 2015, pp. 6597-6606.

XI.Raj Kumar, Dr. G. Janardhana Raju , Dr. Hemachandra Reddy, M. Chakrapani, “Experimental investigation of an Air enhancement device on the performance of a performance of a compression ignition engine”, Journal of Material science and Mechanical Engineering(JMSME),Vol2,No.5,April-june 2015,pp.471-475.

XII.G. Janardhana Raju, K. Srinivasulu Reddy and N. Venkatachalapathi, ” Dynamic Modeling of Landing impact isolator for aero plane”, Journal of Basic and applied Engineering Research(JBAER)Vol.2, No.7,April-June 2015. Pp .600-603.

XIII.Rajkumar,G. Janardhana Raju,Govind Mule,” Optimization of air brake System using rotary compressor in Locomotives”, International Journal for Research in Applied sciences & Engineering Technology(IJRASET), Vol.3, issue IV,April 2015, pp.150-154.

XIV.Venkata Vishnu, G. Janardhana Raju, G. Guruvaiah Naidu, “ Optimization of different Process parameters of Aluminium Alloy 6351 in CNC Milling using TAGUCHI Method”, International Journal of Engineering Research and General Science (IJERGS), ISSN 2091-2730, Vol. 3, Issue. 2, 2015,pp. 407-413.

XV.G. Janardhana Raju, K.Srinivasulu Reddy, N.Venkatachalapathi, “Design Evolution of Drive Booster Configuration for Terrain Vehicles”, International Journal of Vehicle Structures & Systems(IJVSS), Vol.7, Issue.1 , 2015, ISSN:0975-540(Online) 0975-3060(Print), pp.40-43.

XVI.G.Guruvaiah Naidu, A.Venkata Vishnu, Dr.G.Janardhana Raju “Optimization of Process Parameters for Surface Roughness in Milling of En-31 Steel Material Using Taguchi Robust Design Methodology”.International Journal of Mechanical and Production Engineering (IJMPE) ISSN: 2320-2092, Volume- 2, Issue-9, Sept.-2014.

XVII.Mr. A. Raj Kumar, Mr. M. Chakrapani, Dr. G. Janardhana Raju, Dr. Hemachandra Reddy, “Evaluation of C.I Enginer Performance and Emission Characteristics Fueled with Cng and Ethanol Blends as Alternative Fuel”, International Journal for Research in Applied Science and Engineering Technology (IJRASET), Vol. 2 Issue VIII, August, 2014, ISSN: 2321-9653.

XVIII.Raj Kumar, Dr. G. Janardhana Raju, Dr. K. Hemachandra Reddy , “Effect of Exhaust Gas Recirculation on the performance of Diesel Engine with Iso – Butanol blends”, International Journal of Application or Innovation In Engineering & Management, ISSN 2319 -4847,Vol.4, Special Issue, March 2014,pp. 1-5.

XIX.Raj Kumar, Dr. G. Janardhana Raju, Dr. K. Hemachandra Reddy, “The effect of Iso - butanol Diesel Blends on Duel Fuel Biogas and Diesel Blends Engine Performance” International Journal for Advance Research in Engineering and Technology, vol.2, Issue 1, Jan 2014 ISSN 2320-6802, pp. 22-30.
XX.P. Anjani Vishnu Vardhini, T.V.V.S.N. Murti, Dr. G.Janardhana Raju, “Structural Design of Automated Freight Loading System”, International Journal of Technology and Engineering Science (IJTES), Vol 1 (4), pp 328 – 332, July 2013.

XXI.Raj Kumar, Dr. G. Janardhana Raju, Dr. G. amarender Rao, “Heat Transfer Analysis In the Cylinder Head of a Four Stroke SI Engine”, International Journal of Engineering Research and Technology, vol.2, Issue 5, May 2013, ISSN 2278-0181 , pp. 645-652.

XXII.Dr. A. Jawahar Babu, Dr. G. Janardhana Raju, Dr.S. Viswanath Raju,“A Decision Making Tool for Dynamic Scheduling of Jobshop Problem”, International Journal on Advanced computing, Vol. 2, Issue 1, Jan 2010.

XXIII.G. Janardhana Raju, D. Ravikanth, Dr. C. Subba Rao,, Dr. G. Ranga Janardhana “A Case Study on Maintenance Executive Information system in a Thermal Power Plant” Industrial Engineering Journal, Vol. XXXV NO. 1, January 2006.
ConferencesI) Vinod, Janardhana Raju, Suresh Kumar Reddy, “Optimization of Process parameters in CNC Wirecut EDM using Taguchi Method for Effective Machining of STAVAX ESR”, National Conference on Design and Manufacturing Technologies for Product Life Cycle(DPLC-2016) held at BITS Pilani Hyderabad Campus on March 19-20th 2016.

II) K. Srinivasulu Reddy, D.Sreedhar, G.Janardhana Raju “Effect of CNTs on Hardness and Thermogravimetric properties of LM6 Nanoparticulate composite” 4th International Conference on Materials Processing and Characterization,(ICMPC 2015), 14-15 March 2015, GRIET, Hyderabad, Materials Today Proceedings: Elsevier publication.

III)A.Raj Kumar, Dr. G.Janardhana Raju., Dr. K.Hema Chandra Reddy, published a paper On “Performance and emission analysis of Mamey Sapote biodiesel with Swirl generating technique in intake manifold of Diesel Engine” International Conference on Challenges and Emerging Trends in Management & Technology- Special Issue ICCEMT-2015.


IV)Kameswara Rao Chellapilla and G. Janardhana Raju, “Vibrations of Fluid Conveying Pipe on Winkler Foundation”, International Conference on Newest Drift in Mechanical Engineering. ICNDME-2014, held at M.M Unversity Mullana-Ambala(Haryana),20-21st Dec. 2014.

V)Srinivasulu Reddy K, Sreedhar D, Janardhana Raju G “Effect of CNTs on Hardness and Thermogravimetric Properties of LM6 Alloy”, International Conference on Advanced Materials and Manufacturing Technologies (AMMT 2014), held at JNTUH, 18-19 Dec 2014.

VI)A. Venkata Vishnu, G. Janardhana Raju,G. Guruvaiah Naidu, “Optimization of process parameters for surface roughness in milling of aluminium alloy 6351 using taguchi robust design methodology”,International conference on Advanced Materials and Manufacturing Technologies (AMMT 2014), held at JNTUH, 18-19 Dec 2014.

VII)G. Janardhana Raju, K. Srinivasulu Reddy and N. Venkatachalapathi, “Optimal Design of Landing Impact Isolator for Aero Plane”, International Conference on Advances in Design and Manufacturing (ICAD&M’14), held at NIT Tiruchirapally, 5-7th Dec. 2014, pp.1604 - 1608

VIII)N. Venkatachalapathi, P.C. Elumalai, G. Janardhana Raju, “Optimization of FMS Simulation Model by Using ARENA OPT QUEST”, International Conference on Advances in Design and Manufacturing (ICAD&M’14), held at NIT Tiruchirapally, 5-7th Dec. 2014.pp. 1719-1723.

IX) Srinivasulu Reddy K, Sreedhar D, Nagesh P, G.Janardhana Raju “Fabrication and Mechanical Properties of AlSi12 Nanoparticulate Composite” 2nd International Conference on Nanomaterials and Technologies (CNT-2014) , held at Vardhaman College of Engineering on 17-18 October 2014, - Procedia Materials Science, Elsevier Ltd.

X) B. Satish Kumar, G. Janardhana Raju, Dr. G. Ranga Janardhana, “Need for Implementing of Flexible Manufacturing System in Indian Industries, National Conference on New Frontiers In Mechanical Engineering (NFME 2K!4) organized by Department of Mechanical Engineering, JNTU Kakinada, on 18th -19th July 2014.

XI)A. Raj Kumar, Dr. G. Janardhana Raju, Dr. K. Hemachandra Reddy , “Effect of Exhaust Gas Recirculation on the performance of Diesel Engine with Iso – Butanol blends”, National Conference on Emerging Trends in Mechanical Engineering for Sustainable Development – 2014(NCETMESD) held at RGMCET Nandyal, 22nd March 2014.

XII) B. Satish Kumar, G. Janardhana Raju, “Simulation of Flexible Manufacturing Systems”, National Conference on Recent Innovations In Mechanical Engineering(RIME 2014) organized by Department of Mechanical Engineering, CMRCET Hyderabad on 21st March 2014.

XIII)Janardhana Raju. G, Sreenivasulu Reddy .K, Venkatachalapathi .N, “Evolution of Drive Booster Configuration for Terrain Vehicles”, International Conference on Newest Drifts in Mechanical Engineering ICNDME-2014, pp 440 – 445.


XVI)Kameswara Rao Chellapilla and G Janardhana Raju, “Free Torsional Vibrations of Clamped and Hinged Thin-walled Open Section Beams including Effects of Constant Thermal Gradient”, International Conference on Newest Drifts in Mechanical Engineering, M.M University Ambala, ICNDME-2014, pp 644 – 647.

XV)Satish Kumar, G. Janardhana Raju, Dr. G. Ranga Janardhana, “A Review on application of Genetic Algorithms, Fuzzy Logic and Neural Networks for Multi Objective Scheduling under the Resource Constrained”, International Conference on Advances in Industrial Engineering Applications (ICAIEA - 2010), Jan 6- 8, 2010, organized by Department of Industrial Engineering , Anna University Chennai .

XVI)Dr. A. Jawahar Babu, Dr. G. Janardhana Raju, Dr.S. Viswanath Raju,“Decision Support System for Job Shop Scheduling”,International Conference on advanced Computing Technologies, Dec. 26-27, 2008 ,GRIET, Hyderabad-90.

XVII)Janardhana Raju, D. Ravikanth, Dr. C. Subba Rao,, Dr. G. Ranga Janardhana “Development of Management Information system for stores management in a Thermal power plant-A case study”, International conference GMI-2006, July 27-29,2006,CIT, Coimbatore-34.

XVIII) G. Janardhana Raju, D. Ravikanth, Dr. C. Subba Rao ,“A Study on Management Information System For Selective Inventory Control in a Cement Manufacturing Unit”, National Conference on Computer Applications in Mechanical Engineering (CAME-2005),at JNTU College of Engineering, Ananthapur, 21st December 2005.

XIX)G. Janardhana Raju, D. Ravikanth, Dr. C. Subba Rao ,“Designs and Development of Decision Support System for Materials Management Department in a basic supply Chain Oriented Environment- A Case Study in a Spinning Mill” Second International Conference on Logistics and Supply Chain Management a PSG College of Technology, Coimbatore 3rd –5th August, 2004.


XX)D. Ravikanth, G. Janardhana Raju, Dr. C. Subba Rao, “Applications of Simulation in Manufacturing and Materials handling system design and optimization”, National Conference on advanced Trends in Mechanical Engineering and Research and Development at JNTU College of Engineering, Anantapur. 21st December 2002.

XXI) G. Janardhana Raju, D. Ravikanth, Dr. C. Subba Rao “Operations Research Modeling applications in manufacturing and Service organization A Review”, National Conference on advanced Trends in Mechanical Engineering and Research and Development at JNTU College of Engineering, Anantapur. 21st December 2002.

XXII) D. Ravikanth, G. Janardhana Raju, Dr. C. Subba Rao “A Review of Machatronics applications in Robotics and Computer Aided Manufacturing Systems”, National seminar on Recent Trends in Production and Industrial Engineering, GPR college of Engineering, Kurnool, 09th December 2002.

XXIII)G. Janardhana Raju, D. Ravikanth, Dr. C. Subba Rao , “Management Information System: A Vital Resource for Computer Integrated Manufacturing” National seminar on Recent Trends in Production and Industrial Engineering, GPR college of Engineering, Kurnool, 09th December 2002.
Memberships I) Life Member in ISTE (LM 28638)

II) IE(I) Membership (AMU89031-9)
Ph.D. GuidanceOne awarded and One Pursuing
Guest Lecture on FEM
Guest Lecture Auto Desk
Entrepreneurship Awareness Camp
Aero Glider Workshop
Counselling Code
NNRG Counselling Code
Print Friendly, PDF & Email

© Copyright 2016 Nalla Narasimha Reddy Education Society’s Group of Institutions - Integrated Campus. All Rights Reserved. Crafted by www.teachershive.com

Google 360 - College View