loading

Mechanical Engineering

Achievements

Students Achievements

2015-162014-15
S No.Register
No.
Name of the StudentClassName of the
Program
Name of the
Event
Host
Institution
Date(s)Prize Details
1137Z1A0308A.S. Akhil III YearSrujana (Technical Symposium)Paper PresentationJNTUH22nd-26th March ,2015Participation
2127Z1A0306Athish SivadasanIII YearSrujana (Technical Symposium)Paper PresentationJNTUH22nd-26th March ,2015Participation
3147Z5A0301M.NarsimhaIII YearSrujana (Technical Symposium)Paper PresentationJNTUH22nd-26th March ,2015Participation
4137Z1A0322C.Pranav SrivatsavIII YearSrujana (Technical Symposium)Paper PresentationJNTUH22nd-26th March ,2015Participation
5137Z1A0346K Dhruvakumar ReddyIII YearSrujana (Technical Symposium)Paper PresentationJNTUH22nd-26th March ,2015Participation
6137Z1A0353K. ManikreddyIII YearSrujana (Technical Symposium)Paper PresentationJNTUH22nd-26th March ,2015Participation
7137Z1A0324D Akhil DeshmukhIII YearSrujana (Technical Symposium)Paper PresentationJNTUH22nd-26th March ,2015Participation
8137Z1A0330E Morris MosesIII YearWorkshopQuadcoptorIIT Bombay5-6th March ,2015Participation
9127Z1A0302A.Sai KiranIV YearWorkshopRoboticsIIT Bombay7 , 8 , 9 March , 2015Participation
S.NoRegistered noName of StudentClass Name of ProgrameName of EventHost InstitutionDatesPrize
1117Z1A0316PhanidharIV YRRobotriksWorkshopNNRG13-10-2014Participation
2117Z1A0304Nandith ReddyIV YRRobotriksWorkshopNNRG13-10-2014Participation
3127Z1A0302Sai KiranIII YRRobotriksWorkshopNNRG13-10-2014Participation

Faculty Achievements

Dr. G. Janardhana Raju

 A. Raj Kumar, Dr. G. Janardhana Raju , Dr. Hemachandra Reddy,”Performance and Emission Analysis of Mamey Sapote Biodiesel with Swirl Generation Technique in Intake Manifold of Diesel Engine”, International Journal of Core Engineering & Management, ISSN:2348-9510(online)Volume.1,Issue: Dec 2015.pp. 22-29.

 A. Raj Kumar, Dr. G. Janardhana Raju , Dr. Hemachandra Reddy, M. Chakrapani, “Experimental investigation of an Air enhancement device on the performance of a performance of a compression ignition engine”, Journal of Material science and Mechanical Engineering(JMSME),Vol2,No.5,April-June 2015,pp.471-475.

 G. Janardhana Raju, K. Srinivasulu Reddy and N. Venkatachalapathi, ” Dynamic Modeling of Landing impact isolator for aero plane”, Journal of Basic and applied Engineering Research(JBAER)Vol.2, No.7,April-June 2015. Pp .600-603.

 A. Rajkumar,G. Janardhana Raju,Govind Mule,” Optimization of air brake System using rotary compressor in Locomotives”, International Journal for Research in Applied sciences & Engineering Technology(IJRASET), Vol.3, issue IV,April 2015, pp.150-154.

 A. Venkata Vishnu, G. Janardhana Raju, G. Guruvaiah Naidu, “ Optimization of different Process parameters of Aluminium Alloy 6351 in CNC Milling using TAGUCHI Method”, International Journal of Engineering Research and General Science (IJERGS), ISSN 2091-2730, Vol. 3, Issue. 2, 2015,pp. 407-413.

 G. Janardhana Raju, K.Srinivasulu Reddy, N.Venkatachalapathi, “Design Evolution of Drive Booster Configuration for Terrain Vehicles”, International Journal of Vehicle Structures & Systems(IJVSS), Vol.7, Issue.1 , 2015, ISSN:0975-540(Online) 0975-3060(Print), pp.40-43.

 G.Guruvaiah Naidu, A.Venkata Vishnu, Dr.G.Janardhana Raju “Optimization of Process Parameters for Surface Roughness in Milling of En-31 Steel Material Using Taguchi Robust Design Methodology”.International Journal of Mechanical and Production Engineering (IJMPE) ISSN: 2320-2092, Volume- 2, Issue-9, Sept.-2014.

 Mr. A. Raj Kumar, Mr. M. Chakrapani, Dr. G. Janardhana Raju, Dr. Hemachandra Reddy, “Evaluation of C.I Enginer Performance and Emission Characteristics Fueled with Cng and Ethanol Blends as Alternative Fuel”, International Journal for Research in Applied Science and Engineering Technology (IJRASET), Vol. 2 Issue VIII, August, 2014, ISSN: 2321-9653.

 A. Raj Kumar, Dr. G. Janardhana Raju, Dr. K. Hemachandra Reddy , “Effect of Exhaust Gas Recirculation on the performance of Diesel Engine with Iso – Butanol blends”, International Journal of Application or Innovation In Engineering & Management, ISSN 2319 -4847,Vol.4, Special Issue, March 2014,pp. 1-5.

 A. Raj Kumar, Dr. G. Janardhana Raju, Dr. K. Hemachandra Reddy, “The effect of Iso – butanol Diesel Blends on Duel Fuel Biogas and Diesel Blends Engine Performance” International Journal for Advance Research in Engineering and Technology, vol.2, Issue 1, Jan 2014 ISSN 2320-6802, pp. 22-30.

 P. Anjani Vishnu Vardhini, T.V.V.S.N. Murti, Dr. G.Janardhana Raju, “Structural Design of Automated Freight Loading System”, International Journal of Technology and Engineering Science (IJTES), Vol 1 (4), pp 328 – 332, July 2013.

 A. Raj Kumar, Dr. G. Janardhana Raju, Dr. G. amarender Rao, “Heat Transfer Analysis In the Cylinder Head of a Four Stroke SI Engine”, International Journal of Engineering Research and Technology, vol.2, Issue 5, May 2013, ISSN 2278-0181 , pp. 645-652.

 Dr. A. Jawahar Babu, Dr. G. Janardhana Raju, Dr.S. Viswanath Raju,“A Decision Making Tool for Dynamic Scheduling of Jobshop Problem”, International Journal on Advanced computing, Vol. 2, Issue 1, Jan 2010.

 G. Janardhana Raju, D. Ravikanth, Dr. C. Subba Rao,, Dr. G. Ranga Janardhana “A Case Study on Maintenance Executive Information system in a Thermal Power Plant” Industrial Engineering Journal, Vol. XXXV NO. 1, January 2006.

Dr. Chellapilla Kameswara Rao

 Lokavarapu Bhaskara Rao and Chellapilla Kameswara Rao, “Fundamental Buckling of Circular Plates with Elastically Restrained Edges and Resting on Concentric Rigid Ring Support”, Frontiers of Mechanical Engineering, (In Print/Proof Corrected), May 2013 issue.

 Lokavarapu Bhaskara Rao and Chellapilla Kameswara Rao, “Frequencies of Circular Plates Weakened Along an Internal Concentric Circle and Elastically Restrained Edge Against Translation”, Journal of Appied. Mechanics, Volume 80, Number 1, Paper No. 011005-1 to 011005-7, January 2013.

 Lokavarapu Bhaskara Rao and Chellapilla Kameswara Rao, “Free Vibration of Circular Plates with Elastic Edge Support and Resting on an Elastic Foundation”,International Journal of Accoustics and Vibration, Volume 17, Number 4, December 2012, pp.204-207.

 Lokavarapu Bhaskara Rao and Chellapilla Kameswara Rao, “ Buckling of Circular Plates with an Internal Elastic Ring Support and Outer Edge Restrained Against Translation”, Journal of Engineering Science and Technology, Vol. 7, No.3, June 2012, pp. 393 – 401.

 L. Bhaskara Rao and C. Kameswara Rao, “Vibrations of elastically restrained circular plates resting on Winkler Foundation”, Accepted for publication in The Arabian Journal for Science and Engineering, March 2012.

 Simha, H. S. and Kameswara Rao, C. “Thermal Buckling of Fluid Conveying Single-Walled Carbon Nanotubes Embedded in an Elastic Medium”, International Conference on Nanotechnology & Functional Materials, SNIST, Hyderabad, 2012.

 Simha, H. S. and Kameswara Rao, C. “Free Vibrations of Fluid Conveying Single-Walled Carbon Nanotubes”, International Conference on Nanotechnology & Functional Materials, SNIST, Hyderabad, 2012.

 Kameswara Rao, C. and Simha, H. S. “Vibrations of Fluid-Conveying Pipes Resting on Two-parameter Foundation”, The Open Acoustics Journal, Banthem Publications, 2008, 1, 24-33.

 Simha, H. S. and Kameswara Rao, C. “Critical Velocity of Fluid Conveying Pipes Resting on Two-parameter Foundation”, Journal of Sound and Vibration 302 (2007) 387–397

 Kameswara Rao, C., Sravana Kumar, G., Vijaya Kumar, K., and Sameer, T., “ Fundamental Frequencies of Restrained Cantilever Blades including the Effects of Thermal Gradient”, Proceedings of RACE 2006, March 3-5, 2006, Osmania University, India.

 Kameswara Rao, C., and Ratna Kiran V., “ Finite Element Analysis of Torsional Vibrations of Thin-Walled Beams on Two Parameter Foundation”, Proceedings of RACE 2006, March 3-5, 2006, Osmania University, India.

 Kameswara Rao, C., and Bhaskara Rao, L., “ Vibrations of Elastically Restrained Circular Plates on Winkler’s Foundation”, Proceedings of RACE 2006, March 3-5, 2006, Osmania University, India.

 Kameswara Rao, C., and Ratna Kiran, V., “Torsional Vibrations of Thin-walled Beams Resting on Continuous Two Parameter Foundation”, Proceedings of National Conference on Advances in CAD/ CAM, February 27-28, 2006, JNTU College of Engineering, Kakinada, A.P., India.

 Kameswara Rao, C. “ Frequency Analysis of Boiler Support Structure Subjected to Earthquake Excitation”, (Keynote Speech), Proceedings of International Conference on Advances in Structural Dynamics and its Applications (ICASDA-2005), Conference held at GITAM, Visakhapatnam – 539 045, during 7-9 Dec. 2005, pp. 415 – 424.

 Chellapilla, Kameswara Rao., and Hari Simha, “Critical Flow Velocities of Elastically Restrained Multi-span Fluid Conveying Pipes Resting on Continuous Elastic Foundation”, Proceedings of the 13th International Conference on Nuclear Engineering, Beijing, China, May 2005 Paper No.50473

 Kameswara Rao, C., and Ramesh, M., “Free Torsional Vibrations of Generally Restrained Thin-walled Beams of Open Section”, Proceedings of ICASDA 2005, pp. 210 – 217.

 Kameswara Rao, C., and Simha, H., “ Critical Velocity of Fluid Conveying Pipes Resting on Two-Parameter Foundation”, Proceedings of ICASDA 2005, pp. 609 – 617.

 Radhakrishna, M., and Kameswara Rao, C., “ Vibrations of Double Bellows Type Expansion Joint in Lateral and Rocking Modes”, Accepted for Publication in International Journal of Structural Stability and Dynamics, Published by World Scientific Publishing Co. Pte Ltd, London, U.K.,

 Radhakrishna, M and Kameswara Rao, C. “Axial Vibrations of U Shaped Bellows with Elastically Restrained End Conditions”, Thin-walled Structures, Vol. 42, 2004, pp. 415 – 426,Published by Elsevier Applied Science Publishers, Great Britain.

 Kameswara Rao, C and Radhakrishna, M. “Seismic Response of Elastically Restrained Single Bellows Expansion Joint in Lateral Mode”, Proceedings of the Eleventh International Conference on Nuclear Engineering, April 20-24, 2003, Tokyo, Japan, Paper No. ICONE 11-36400, pp 1-6.

 Kameswara Rao, C and Radhakrishna, M. “Transverse Vibrations of Single Bellows Expansion Joint Restrained Against Rotation”, Proceedings of the Tenth International Conference on Nuclear Engineering, April 14-18,2002, Arlington, Virginia, USA, Paper No. ICONE 10-22090, pp. 1-5.

 Kameswara Rao, C and Radhakrishna, M. “Transverse Vibrations of Double Expansion Joint Restrained Against Rotation”, Proceedings of the Tenth International Conference on Nuclear Engineering, April 14-18, 2002, Arlington, Virginia, USA, Paper No. ICONE 10-22092.

 Radhakrishna, M and Kameswara Rao, C. “Finite Element Analysis of Axial Vibrations of Single Bellows Elastically Restrained Against Rotation”, Proceedings of Second International Conference on Vibration Engineering and Technology of Machinery, VETOMAC-2, December 16-18, 2002, Mumbai, India.

 Radhakrishna, M and Kameswara Rao, C.”Finite Element Analysis of Transverse Vibrations of Single Bellows Expansion Joint Restrained Against Rotation”, Paper communicated to Journal of Thin-Walled Structures, Elsevier Applied Science Publishers, Great Britain, 2002.

 Radhakrishna, M and Kameswara Rao, C.”Vibrations of Fluid Filled Bellows- A State-of-the-Art”, Proceedings of the National Symposium on Advances in Structural Dynamics and Design, Jan 9-11, 2001.

 Simha, H. & Kameswara Rao, C., “Finite Element Analysis of Vibrations of Rotationally Restrained Fluid Conveying Pipes Resting on Soil Medium” Proceedings of the National Symposium on Advances in Structural Analysis and Design, pp 569-578, Allied Publishers, Chennai, January 2001.

 Simha, H, and Kameswara Rao, C., “Finite Element Analysis of Vibrations of Rotationally Restrained Fluid Conveying Pipes Resting on Soil Medium”, Proceedings of the Conference on Advances in Structural Dynamics and Design held at SERC, Chennai, Jan 2001, pp.569-577.

 Srinivasulu, N. V. & Kameswara Rao, C., “Galerkin Finite Element Analysis of Free Torsional Vibrations of Tapered Cantilever I-Beams” Paper no. CP071, Proceedings of Vibration Engineering and Technology of Machinery, IISc, Bangalore, October 2000.

 Simha, H. & Kameswara Rao, C.,”Finite Element Analysis of Vibrations Fluid Conveying Pipes Resting on Soil Medium”, Proceedings of the Technical Conference on Pressure Vessels and Piping, pp 173-182, Hyderabad, October 1997.

 Raghava Chary, S., Kameswara Rao, C., and Iyengar, R. N., “Vibration of Fluid Conveying Pipe on Winkler Foundation,” Proc of 8th National Convention of Aerospace Engineers on Aeroelasticity, Hydroelasticity and other Fluid-Structure Interaction Problems, IIT Kharagpur, India, pp. 266-287, March 5-6, 1993.

 Kameswara Rao, C., “Frequency Analysis of Two-Span Uniform Euler-Bernoulli Beams,” Journal of Sound and Vibration, Vol. 137, pp. 144-150, 1990.

 Kameswara Rao, C., “Frequency Analysis of Clamped-Clamped Uniform Beams with Immediate Elastic Support,” Journal of Sound and Vibration, Vol. 133, pp. 502-509, 1989.

 Kameswara Rao, C., and Mirza, S., “Torsional Post-Buckling of Thin-Walled Beams Resting on Continuous Elastic Foundation,” Thin-Walled Structures, Vol. 8, pp. 55-62, 1989.

 Kameswara Rao, C., and Mirza, S., “Torsional Vibrations and Buckling of Thin-Walled Beams on Elastic Foundation,” Thin-Walled Structures, Vol. 7, pp. 73-82, 1989.

 Kameswara Rao, C., and Mirza, S., “Seismic Analysis of High Speed Rotating Machinery,” Nuclear Engineering and Design, Vol. III, pp. 395-402, 1989.

 Kameswara Rao, C., and Mirza, S., “A Note on Vibrations of Generally Restrained Beams,” Journal of Sound and Vibration, Vol. 130, pp. 453-465, 1989.

 Kameswara Rao, C., and Mirza, S., “Accurate Estimates of Natural Frequencies and Mode Shapes of Flexible Piping Carrying an Arbitrarily Located Heavy Valve,” Chapter 3 – Pipiline Dynamics, Proc. of PVP Conference, Pittsburg, Pennsylvania, Seismic Engineering, PVP-Vol. 144, pp. 221-226, June 1988.

 Kameswara Rao, C., “Fundamental Frequencies of Cantilever Blades with Resilient Roots,” Journal of Sound and Vibration, Vol. 126, pp. 363-366, 1988.

 Kameswara Rao, C., “Torsional Frequencies and Mode Shapes of Generally Constrained Shafts and Piping,” Journal of Sound and Vibration, Vol. 125, pp. 115-121, 1988.

 Kameswara Rao, C., and Mirza, S., “Free Torsional Vibrations of Tapered Cantilever I-Beams,” Journal of Sound and Vibration, Vol. 124, pp. 489-496, 1988.

 Kameswara Rao, C., and Mirza, S., “Seismic Analysis of High-Speed Rotating Machinery,” Proc. of 9th International Conference on Structural Mechanics in Reactor Technology, Lausanne, Invited Paper No. K-18-1, August 1987.

 Kameswara Rao, C., and Mirza, S., “Influence of Flexible Connections on the Seismic Response of a Nuclear Condenser,” Proc. Canadian Conference on Earthquake Engineering, pp. 553-558, July 1987.

 Kameswara Rao, C., and Mirza, S., “Seismic Response of Flexibly Connected Piping Systems, Proc. of ASME Pressure Vessels and Piping Conference, San Diego, Seismic Engineering, PVP Vol. 127, pp. 308-313, June 1987.

 Kumar, G. V., Kameswara Rao, C., and Chary, S. R., “Pipe Support Design for Dynamic Loads,” Proc. of ASME Pressure Vessels and Piping Conference, San Diego, Seismic Engineering, PVP Vol. 127, pp. 303-308, June 1987.

 Kameswara Rao, C., and Mirza, S., “Vibration Frequencies and Mode Shapes for Generally Restrained Bernoulli-Euler Beams,” Proc. of ASME Pressure Vessels and Piping Conference, San Diego, Recent Advances in Structural Dynamics, PVP-Vol. 124, pp. 117-121, June 1987.

 Prasad, P. M. L., and Kameswara Rao, C., “Seismic Analysis of SF6 Circuit Breaker,” Proc. Of National Symposium on Vibration of Power Plant Equipment, Bombay, pp. III-6.1 to III-6.9, March 1986.

 Kameswara Rao, C., and Prasad, P. M. L., “Seismic Analysis of 70 MW Turbo-Generator Rotor Bearing System,” Proc. of National Symposium on Vibration of Power Plant Equipment, Bombay, pp. II-9.1 to II-9.9, March 1986.

 Kameswara Rao, C., “Effects of Bellow and Pipe Support Stiffness on Dynamic Response of Piping Systems,” Proc. of ASME Pressure Vessels and Piping Conference, New Orleans, Recent Advances in Seismic Design of Piping and Components, PVP-Vol. 98-3, pp. 267-271, June 1985.

 Rao, J. S., Prasad, P. M. L., and Kameswara Rao, C., “Seismic Analysis of Gasifier Support Structure,” Proc. of Mid-Trem Symp. on Earthquake Effects on Plant and Equipment, Hyderabad, Vol. I, pp. 177-181, December 1984.

 Kameswara Rao, C., Pillai, K. S., and Prasad, P. M. L., “Seismic / Wind Analysis of Common Condenser for a Chemical Plant,” Proc. of Mid-Trem Symp. on Earthquake Effects on Plant and Equipment, Hyderabad, Vol. I, pp. 257-260, December 1984.

 Kameswara Rao, C., and Prasad, P. M. L., “Seismic Analysis of 70 MW Turbo-Generator Foundation,” Proc. of Mid-Trem Symp. on Earthquake Effects on Plant and Equipment, Hyderabad, Vol. I, pp. 143-149, December 1984.

 Kameswara Rao, C., and Vijaya Kumar, G. V., “Effects of Support and Bellow Stiffnesses on Piping Seismic Response,” Proc. of Mid-Trem Symp. on Earthquake Effects on Plant and Equipment, Hyderabad, Vol. I, pp. 107-111, December 1984.

 Kameswara Rao, C., “Seismic Analysis of Rotating Mechanical Systems – State of the Art,” 28th Congress of Indian Sosiety of Theoretical and Applied Mechanics, December 1983.

 Kameswara Rao, C., and Bhatia, K. G., “Evaluation of Seismic Analysis Techniques for Static Electrical Equipment, ” Proc. of Seventh Symp. on Earthquake Engineering, Roorkee, Vol. I, pp. 583-588, November 1982.

 Singh, A. K., Ramadasa, K., Kameswara Rao, C., and Bhatia, K. G., “Seismic Analysis of General Piping System for Narora Atomic Power Plant,” Proc. of Seventh Symp. on Earthquake Engineering, Roorkee, Vol. I, pp. 571-575, November 1982.

 Kameswara Rao, C., and Bhatia, K. G., “Seismic Analysis of 220 kV Current and Voltage Transformers,” Proc. of Seventh Symp. on Earthquake Engineering, Roorkee, Vol. I, pp. 565-569, November 1982.

 Kameswara Rao, C., Ramadasa, K., Singh, A. K., and Bhatia, K. G., “An Approximate Analysis of 110 MW Boiler Supporting Structure Subjected to Seismic Excitation,” Proc. of Seventh Symp. on Earthquake Engineering, Roorkee, Vol. I, pp. 561-564, November 1982.

 Kameswara Rao, C., “Seismic Analysis of Instrument Transformers,” Proc. of Symp. On Earthquake Disaster Mitigation, Roorkee, India, Vol. I, pp. 165-170, March 1981.

 Kameswara Rao, C., Ramadasa, K., Singh, A. K., and Bhatia, K. G., “Three Dimensional Analysis of 110 MW Boiler Supporting Structure Subjected to Seismic Excitation,” Proc. of Seventh World Conference on Earthquake Engineering, Istanbul, Turkey, Vol. 5, pp. 601-608, September 1980.

 Kameswara Rao, C., “Non-linear Torsional Vibrations and Stability of Thin-Walled Beams on Elastic Foundation,” Symposium on Large Deformations, IIT, New Delhi, December 1979.

 Kameswara Rao, C., “Galerkin Finite Element Analysis of Torsional Vibrations of Tapered Cantilever I-Beams on Elastic Foundation,” Proc. of AGM of Aeronautical Society of India, August 1978.

 Rao, N. L. N., and Kameswara Rao, C., “Vibration Frequencies for Uniform Timoshenko Beams with Central Masses,” Machine Building Industry, pp. 5-8, September 1978.

 Kameswara Rao, C., “Free Torsional Vibrations of Viscoelastic Thin-Walled Beams of Open Section,” Journal of the Aeronautical Society of India, Vol. 29, Nos. 1,2, pp. 43-48, February-May 1977.

 Kameswara Rao, C., “Forced Torsional Vibrations of Thin-Walled Beams of Open Section with Longitudinal Inertia, Shear Deformation and Viscous Damping,” Journal of the Aeronautical Society of India, Vol. 28, No. 4, pp. 405-412, November 1976.

 Kameswara Rao, C., “On the Torsional Wave Propagation in Orthotropic Thin-Walled Beams of Open Section Including Longitudinal Inertia and Shear Deformation,” Journal of the Aeronautical Society of India, Vol. 28, No. 3, pp. 283-288, September 1976.

 Kameswara Rao, C., and Prasada Rao, K. S. R., “Frequency Analysis of Rectangular Isotropic Plates by Galerkin Method,” Journal of the Aeronautical Society of India, Vol. 28, No. 1, pp. 113-120, February 1976.

 Kameswara Rao, C., and Sarma, P. K., “The Fundamental Frequency of Simply Supported Beams with Uniform Taper,” Journal of the Aeronautical Society of India, Vol. 27, No. 4, pp. 169 171, November 1975.

 Kameswara Rao, C., and Satyanarayana, B., “Effect of Thermal Gradient on Frequencies of Tapered Rectangular Plates,” AIAA Journal, Vol. 13, No. 8, pp. 1123-1126, August 1975.

 Kameswara Rao, C., “Nonlinear Torsional Vibrations of Thin-Walled Beams of Open Section,” J. of Appl. Mech., Trans. ASME, pp. 241-243, March 1975.

 Kameswara Rao, C., and Appala Satyam, A., “Torsional Vibrations ans Stability of ThinWalled Beams on Continuous Elastic Foundation,” AIAA Journal, pp. 232-234, February 1975.

 Kameswara Rao, C., Gupta, B. V. R. and Rao, D. L. N., “Torsional Vibrations of Thin-Walled Beams on Continuous Elastic Foundation Using Finite Element Method,” Proc. of the Intl. Conference on Finite Element Methods in Engineering, Coimbatore, pp. 231-248, December 1974.

 Kameswara Rao, C., Appa Rao, K. V., and Sarma, P. K., “Effect of Longitudinal Inertia andof Shear Deformation on the Torsional Frequency and Normal Modes of Thin-Walled Open Section Beams,” Journal of the Aeronautical Society of India, Vol. 26, Nos. 1,2, pp. 32-41, May 1974.

Pavan Kumar Thimmaraju

 “Suitability of Different Hardening models for computational stimulations of Deep drawing process of magnesium Alloy AZ31” in the National Conference on Advances in Mechanical Engineering on 19th & 20th September 2014 at Nalla Malla Reddy Engineering College , RR.Dist.

 Paper Published on “Influence of Tool Geometry in Friction Stir Welding on Material Flow Pattern”, International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, P-ISSN 2347 – 5161, 2014 INPRESSCO.

G.Guruvaiah Naidu

 A.Venkata Vishnu, G. Guruvaiah Naidu, K B G Tilak , J.Ramakrishna , “Application of Taguchi Method in the Optimization of Turning Parameters for Material Removal Rate of En-36 Material”, International Journal of Advance Engineering and Research Development E-I SSN (O): 2348-4470 P-ISSN (P): 2348-6406 , Volume 2, Issue 8, August-2015

 G.Guruvaiah Naidu, A.Venkata Vishnu, Dr.G.Janardhana Raju “Optimization of Process Parameters for Surface Roughness in Milling of En-31 Steel Material Using Taguchi Robust Design Methodology”, International Journal of Mechanical and Production Engineering (IJMPE) ijmpe.iraj.in ISSN: 2320-2092, Volume- 2, Issue-9, Sept.-2014.

 Dr. G. Janardhana Raju, G. Guruvaiah Naidu, K. Suresh Kumar “Structural Design of Attitude Simulator for Performance Evaluation of Automobile Systems”, International Journal of Engineering Research (IJER) www.ijer.in ISSN:2319-6890 Volume No.3 Issue No: Special 1, PP: 183-186, March 2014.

 G. Guruvaiah Naidu, A.Venkata Vishnu, E.Sanjana “Optimization of Heavy Vehicle Suspension System Using Composites”, International Journal of Engineering Research & Technology (IJERT) www.ijert.org ISSN: 2278-0181 Vol. 2 Issue 9, pp. 1085- 1092, Sep – 2013.

 K. Suresh Kumar, G. Guruvaiah Naidu, A.Venkata Vishnu “Performance and Emission Evaluation of a DI Diesel Engine Using Nerium Oil as Alternative Fuel”, International Journal of Engineering Research & Technology (IJERT) www.ijert.org ISSN: 2278-0181 Vol. 2 Issue 9, pp. 2510- 2517 Sep – 2013.

K.Suresh Kumar

 Structural Design of Attitude Simulator for Performance Evaluation of Automobile Systems (IJER ISSN:2319-6890, Volume No.3 Issue No: Special 1, PP: 183-186, 22nd March 2014

 Performance and Emission Evaluation of a DI Diesel Engine Using Nerium Oil as Alternative Fuel (IJERT ISSN: 2278-0181, Vol. 2 Issue 9, pp. 2510- 2517, Sep– 2013

 Performance and Emission Evaluation of DI Diesel Engine Using Cotton Seed Oil As Alternative Fuel

Venkata Vishnu

 A.Venkata Vishnu, G. Guruvaiah Naidu, K B G Tilak, J.Ramakrishna, “Application of Taguchi Method in the Optimization of Turning Parameters for Material Removal Rate of En-36 Material”, International Journal of Advance Engineering and Research Development E-ISSN (O): 2348-4470 P-ISSN (P): 2348-6406, Volume 2, Issue 8, August-2015.

 A.Venkata Vishnu, K B G Tilak, G. Guruvaiah Naidu, Dr.G.Janardhana Raju “Optimization of Different Process Parameters of Aluminium Alloy 6351 in CNC Milling Using Taguchi Method”, International Journal of Engineering Research and General Science, ISSN: 2091-2730,Nepal, Vol.3 Issue 2, March-April-2015.

 G. Guruvaiah Naidu, A.Venkata Vishnu, G.Janardhana Raju “Optimization of Process Parameters for Surface Roughness in Milling of EN-31 Steel Material Using Taguchi Robust Design Methodology”, International Journal of Mechanical And Production Engineering ISSN: 2320-2092, Vol.2 Issue 9, September-2014.

 T. Pavan Kumar, A. Venkata Vishnu, Rakshit. S “Influence of Tool Geometry in Friction Stir Welding on Material Flow Pattern”, International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, P-ISSN 2347 – 5161, 2014 INPRESSCO.

 A.Venkata Vishnu, E.Sanjana, G. Guruvaiah Naidu “Optimization of Heavy Vehicle Suspension System Using Composites”, International Journal of Engineering Research & Technology (IJERT) www.ijert.org ISSN: 2278-0181 Vol. 2 Issue 9, September – 2013, pp. 1085- 1092.

 K. Suresh Kumar, G. Guruvaiah Naidu, A.Venkata Vishnu “Performance and Emission Evaluation of a DI Diesel Engine Using Nerium Oil as Alternative Fuel”, International Journal of Engineering Research & Technology (IJERT) www.ijert.org ISSN: 2278-0181 Vol. 2 Issue 9, September – 2013, pp. 2510- 2517.

 Venkata Ramana, A. Venkata Vishnu, G. Krishna Mohan Rao, D. Hanumantha Rao, “Experimental Investigations, Optimization Of Process Parameters And Mathematical Modeling In Turning Of Titanium Alloy Under Different Lubricant Conditions”, IOSR Journal of Engineering (IOSRJEN) www.iosrjen.org ISSN : 2250-3021 Vol. 2 Issue 1, Jan.2012, pp. 086-101.

M.Narendhar Baba

 K. Suresh Kumar, A. Nandith Reddy, M. Narendhar Baba, K. Lavanya, International Journal of Engineering Research & Technology (IJERT) www.ijert.org e-ISSN:   2278-0181,  Vol. 3 – Issue 7 (July – 2014), 28-07-2014

K B G Tilak

  “Application of Taguchi Method in the Optimization of Turning Parameters for Material Removal Rate of En-36 Material”, International Journal of Advance Engineering and Research Development E-ISSN (O): 2348-4470 P-ISSN (P): 2348-6406, Volume 2, Issue 8, August-2015.

 “Optimization of Different Process Parameters of Aluminium Alloy 6351 in CNC Milling Using Taguchi Method”, International Journal of Engineering Research and General Science, ISSN: 2091-2730, Nepal, Vol.3 Issue 2, March-April-2015.

 Presented a paper titled “Alternative fuels for automobiles” in 2nd National level Technical Symposium, Organized by Department of Mechanical Engineering SIR C.R.Reddy College of Engineering, Eluru.

J. Ramakrishna

 International Journal of Advance Engineering and Research Development E-I SSN (O): 2348-4470 P-ISSN (P): 2348-6406 , Volume 2, Issue 8, August-2015

 A.Venkata Vishnu, G. Guruvaiah Naidu, K B G Tilak , J.Ramakrishna , “Application of Taguchi Method in the Optimization of Turning Parameters for Material Removal Rate of En-36 Material”,

Harinadh Vemanaboina

 Poster selected for presentation entitled “Thermal Modeling and Analysis of Multi-pass Tig Welding Process by ABAQUS”, PLASMA-2015 at Kolkata, November-2015.

 Paper Accepted For Presentation a research paper entitled “Multipass Welding Of Inconel Material With Pulsed Current Gas Tungsten Arc Welding” in 5th International conference on Materials Processing and Characterization (ICMPC-2015), Department of mechanical Engineering, GRITE, Hyderabad.

 Published a paper in NWS-2015 “Effect of heat flow condition in Analysis of Electron Beam Welding” Id no: 5-C: Modeling/Weld Simulation –II at Shavak Nanavati Technical Institute (SNTI), Bistupur, Jamshedpur.

 Published a research paper entitled with “Comparative Studies on Heat Flux and Thermal Stress Analysis during Conduction Mode and Keyhole Mode in the Laser Beam Welding” in 1st International conference on Structural Integrity (ICONS-2014), organized by Indira Gandhi Centre for Atomic Research, Kalpakkam, The Indian Institute of Metals, Kalpakkam Chapter, Society for Failure Analysis, Chennai Center, Indian Institute of Welding, Kalpakkam, India, during, February 4-7, 2014.

 “Welding Process Model for temperature and Residual stress analysis”, Elsevier journal, Procedia Materials Science 6 (2014) 1539 – 1546.

 “A welding simulation of dissimilar materials SS304l and Copper”, Elsevier journal, Procedia Materials Science 5 (2014) 2440 – 2449.

 “Optimization of Process Parameter of SMAW Using Taguchi Methods”, International Journal of Latest Trends in Engineering Science and Technology, volume 1, issue-2 pages 1-7, 2014.

 Published a research paper entitles “Heat Flux for Welding Processes: Model for Laser Weld” at National Welding Seminar -2012 conducted by “The Indian Institute of Welding” during February 7th -9th ,2013, Bangalore, (Paper ID: 151)

Guest Lecture on FEM
Guest Lecture Auto Desk
Entrepreneurship Awareness Camp
Aero Glider Workshop
Counselling Code
NNRG Counselling Code
Google 360 - College View