loading

Civil Engineering

LABS

1.-CONCRETE-HIGHWAY-MATERIALS-LAB2.SURVEYING-LAB3.ENGINEERING-GEOLOGY-LAB4.ENVIRONMENTAL-ENGINEERING-LAB5.SOIL-MECHANICS-LAB6.-FLUID-MECHANICS-HYDRAULIC-MACHINERY-LAB7.STRENGTH-OF-MATERIALS-LAB8.-COMPUTER-AIDED-DRAFTING-OF-BUILDINGS-LAB9-GEGRAPHICAL-INFORMATION-SYSTEM-LAB

Computer Aided Drafting of Buildings (CAD) Lab

Objective :

Introduces AutoCAD software as a design and drafting tool for architecture and interior design. AutoCAD design software is widely used in the Architectural Design and Drafting professions. Create, annotate, edit and plot drawings using basic AutoCAD commands and features. Computer Aided Design-CAD is defined the use of information technology (IT) in the Design process. A CAD system consists of IT hardware (H/W), specialized software (S/W) (depending on the particular area of application) and peripherals, which in certain applications are quite specialised. The CAD Lab engages the imagination of the scientist/engineer to explore a variety of aspects of technological design from assembly of a complicated mechanism to the simulation of a heart pumping. The Lab has top of the line current releases of commercial software for the Design Industry; primarily engineering and architecture. The predominant software used is the Autodesk suite.

List of Experiments (Click here to view)

Geographical Information Systems (GIS) Lab

Objective :

  • Perform basic surface and hydrology analyses of high resolution digital terrain model

(DTM), including: Fill, Flow Direction, Flow Accumulation, Stream Link, Slope and

Hillshade, among other complementary tools

  • Predict the locations of unstable conditions as a function of slope and upslope contributing area (simplification of SHALSTAB shallow slope stability model criterion).
  • Considermonthly precipitation climatology to apply gain a better idea of timing of these slope failures
  • Add additional layers tovisually compare locations of active landslides with buildings, roads, etc.

List of Experiments (Click here to view)

 

S.No.NAME OF THE EQUIPMENT
1CADASTRAL MAPS
2SATELLITE IMAGES
3FLEX &SATELLITE IMAGES

Concrete & Highway Materials Lab 

Objective :

This lab familiarizes the students with the fundamentals and basic concepts. Generally concrete is a composite construction material used for construction of various types of structures. Properties of concrete to understand its suitability for particular job. In this context the concrete laboratory is fully equipped with all the test setups for cement, fine aggregate, coarse aggregate.

Highway materials comprise of Soil (Subgrade & embarkment), aggregate (Course & fire), binders, bitumen, & Cement, to design the pavement desirable properties at aggregate like durability, shape, adhesion of bitumen are required.

List of Experiments (Click here to view)

Major Equipment:

S NONAME OF THE EQUIPMENT
1Crushing Value Apparatus
2Aggregate Impact Apparatus
3Specific gravity bottle
4Density Basket
5Pycnometer
6Ductility Testing Machine
7Ring and Ball Apparatus
8Flash Point (Open) and Fire Point Apparatus
9Vicat Apparatus with aluminium box
10Air permeability apparatus with aluminium box
11Le-Chatelier mould
12Le-Chatelier flask
13Water bath
14Compaction Factor Appataus
15Slump Test Apparatus
16AIMIL Consistometer
17Density Basket
18Cylindrical Metal Measures
19Mould cast iron for 150mm cube
20Mould steel
21Gauging Trowel 100 to 150mm long
22Gauging Trowel 200mm long
23Measuring cylinder
24Vicat Mould
25Beaker 500ml
26Beaker 100ml
27Beaker 250ml
28Lab Concrete mixer
29Thickness guage
30Length Gauge
31Universal Penetrometer
32Penetrometer cone
33Bitumen penetration kit
34Aimil Concrete test hammer
35Sieve G.I.Frame 45cm dia*63mm
36Sieve G.I.Frame 45cm dia*50mm
37Sieve G.I.Frame 45cm dia*40mm
38Sieve G.I.Frame 45cm dia *31.5mm
39Sieve G.I.Frame 45cm dia *25mm
40Sieve G.I.Frame 45cm dia*20mm
41Sieve G.I.Frame 45cm dia*16mm
42Sieve G.I.Frame 45cm dia*12.5mm
43Sieve G.I.Frame 45cm dia*10mm
44Sieve G.I.Frame 45cm dia*6.3mm
45Sieve G.I.Frame 45cm dia*2.36mm
46Pan & Cover
47Immersion type needle vibrator
48Los Angeles Abrasion testing machine
49Compression Testing Machine
50Digital Hot air oven
51Digital thermometer
52Spring Balance
53Bitumen Extractor
54Marshal Stability test Apparatus
55Devals Attrition test apparatus
56Flexure Testing machine
57Set of Sieves for fine aggregate
58Cylindrical Jar for bulking and compactness
59Flow table motorized
60V-Funnel
61L-Box
62Compressometer
63Cylindrical Moulds 150x300mm
64Bitumen heater
65Concrete beam moulds 100x100x150cm

Engineering Geology Lab 

Objective :

This lab familiarizes the students will introduce some basic geologic principles, starting off with basic identification of geologic materials, map use and deformation of rock analogs. Then they will head outdoors to explore geologic and geophysical mapping techniques; and illustrate environmental, geologic and engineering topics through visits to local field sites.Also learn to describe rocks and rock masses in a quantitative manner to be supplemented by normal geological descriptions. Empowering them to understand the state of stress of an element of rock to devise a testing program for the characterization of rock materials and rock masses. Using methodologies they will be capable of carrying out suitable stability analyses for surface and underground structures such as tunneling, mining operations and large dams.

List of Experiments (Click here to view)

Major Equipment:

S.NoEquipment Name
1Minerals
2Economic Minerals
3Igneous rocks
4Sedimentary rocks
5Metamorphic rocks
6Petrological microscopes
7Rock thin sections
8Structural Geology models of folds and faults
9Models for engineering and Mining Geology
10Geological maps
11S.I Toposheets


Environmental Engineering Lab 

Objective :

The Environmental Engineering Lab is one of the laboratories in civil Engineering department. The primary objective of this lab is to determine the parameters in the water sample. The parameters are PH and Turbidity, Conductivity and total dissolved solids (organic and Inorganic) Alkalinity/Acidity, Chlorides, iron, Dissolve Oxygen, Nitrates, Optimum dose of coagulant and total Phosphorous. The well-established equipment’s are used to find the parameters in the water sample.

List of Experiments (Click here to view)

Major Equipment:

S.No.Equipment Name
1Ph
2CONDUCTIVITY
3TDS
4D O
5TURBIDITY
6COD ANALYSER
7HEATER BLOCK
8REAGENTS
9VISIBLE SPECTRO PHOTO METER
10BOD ANALYSER
11BOD INCUBATOR
12MUFFLE FURNACE
13WEIGH BALANCE
14JAR TEST
15BEAKERS -1000ml
16BEAKERS -500ml
17BEAKERS -250ml
18BEAKERS -100ml
19CONICAL FLASK-250ml
20CONICAL FLASK-1000ml
21CONICAL FLASK-100ml
22BURETTE WITH STOP COCK 25ml
23RETORT STAND
24FISHER CLAMP SINGLE
25TISSUE PAPER -200Gms
26REAGENT BOTTLES -125ml
27REAGENT BOTTLES -250ml
28REAGENT BOTTLES -500ml
29DROPPING BOTTLE -125ml
30Glass/Stirring rod 8”
31PIPETTES-1ml
32PIPETTES -5ml
33PIPETTES -10ml
34PIPETTES -2ml
35MEASURING CYLINDERS-50ml
36MEASURING CYLINDERS-100ml
37MEASURING CYLINDERS-250ml
38MEASURING CYLINDERS-500ml
39SPATULA 6”
40PIPETTE PUMP 10ml
41RUBBER BULB
42TEST TUBE STANDS
43PIPETTE STANDS
44TEST TUBE

Geotechnical Engineering/Soil Mechanics Lab

Objective :

The Geotechnical Engineering Lab is one of the laboratories in civil Engineering department. The Geotechnical Engineering Laboratory is equipped with several state-of-the-art instruments that are used to determine the mechanical properties of soils. Equipment is also used to evaluate the engineering characterization of soils and test for the strength and compressibility of foundations, embankments, and earth retaining structures. Index Property and Soil Classification: Includes sieves and sieve shakers, Atterberg limit equipment, specific gravity equipment, expansion index devices, hydrometers, and relative density. Triaxial Test Apparatus: Applies sophisticated boundary conditions to represent accurate stress histories, confining conditions, pore water pressures, and loading conditions for geotechnical construction projects. The well established equipments are used to find the properties and strength of the soil.

List of Experiments (Click here to view)

Major Equipment:

S.No.NAME OF THE EQUIPMENT
1MOISTURE TINS
2ELECTRONIC BALANCE(600gm)
3TRAYS
4STRAIGHT EDGE
5STOP WATCH
6CASAGRANDE'S LIQUID LIMIT APPARATUS
7PLASTIC LIMIT APPARATUS
8SHRINKAGE LIMIT
9CORE CUTTER
10SAND POURING CYLINDER
11SIEVE SHAKER
12LABORATARY PERMEABILITY APPARATUS
13COMPACTION TEST APPARATUS(2.5kg)
14COMPACTION TEST APPARATUS(4.65kg)
15ONE DIMENSIONAL CONSOLIDATION TEST APPARATUS
16BOX SHEAR TEST
17VANE SHEAR APPARATUS
18UNCONFINED COMPRESSION TESTER
19ELECTRONIC BALANCE(20kg)
20CALIFORNIA BEARING RATIO TEST APPARATUS
21PERMEABILITY APPARATUS FOR VARIABLE HEAD TEST
22HYDROMETER ANALYSIS
23TRI-AXIAL TEST APPARATUS
24UNIVERSAL SAMPLE EXTRACTOR
25GRAIN SIZE ANALYSIS
26CBR 2 MOULDS
27MEASURING CYLINDER, GRADUVATED GLASS CYLINDER 100ml CAPACITY
28GLASS ROD FOR STIRRING 17''
29DENSITY BOTTLE
30WASH BOTTLE
31MEASURING CYLINDER 50ml
32OVEN

Surveying Lab

Objective :

This lab familiarizes the students with the fundamentals and basic concepts of surveying. Surveying is the technique, profession, and science of determining the terrestrial or three-dimensional position of points and the distances and angles between them and to find out areas.

In this lab students work with elements of mathematics (geometry and trigonometry). They use equipment like total stations, Chains, Dumpy Level Theodolite etc.

Surveying has been an element in the development of the human environment since the beginning of recorded history. The planning and execution of most forms of construction require it. It is also used in transport, communications, mapping, and the definition of legal boundaries for land ownership.

List of Experiments (Click here to view)

Major Equipment:

S.No.Name of the Equipment 
1BOX SEXTANTS
2RANGING RODS
3RANGING RODS
4OPTICAL SQUARES
5CHAIN (30mts&20mts)
6CHAIN (30mts&20mts)
7METRIC CHAIN (30mts)
8CROSS STAFF
9PRISMATIC COMPASS with stands
10PRISMATIC COMPASS with stand
11LEVELLING STAFFS
12CUBE MOULDS
13PLANE TABLE SETS
14AUTO LEVEL
15TAPES (30mts)
16TAPES (20mts)
17TAPES (50mts)
18ARROWS
19DUMPY LEVEL with stands
20PLANIMETERS
21VERNIER THEODOLITE WITH STAND
22TOTAL STATION (South precision)
23DIGITAL THEODOLITE
24VERNIER THEODOLITE WITH STAND
25TAPE (30mts)
26GPS (Etrex-20)
27TOTAL STATION (Sokia)

FLUID MECHANICS & HYDRAULIC MACHINERY LAB

Objective :

The objective of this subject is to provide the basic knowledge of various turbines and study their performance under various conditions of load. Various apparatus like orificemeter , venturimeter etc. will be studied to check their performance.

List of Experiments (Click here to view)

S NONAME OF THE EQUIPMENT
1Single stage centrifugal pump
2Orifice & Mouth Piece Tank Apparatus
3Hydraulic Jump
4Sudden Closer Valve Set up
5Weir Set up

STRENGTH OF MATERIALS LAB

Objective :

The Objective of this lab is to study the strength of various engineering materials by performing various tests.

List of Experiments (Click here to view)

S.No.NAME OF THE EQUIPMENT
1Universal testing machine
2Torsion testing machine
3Rockwell cum Brinell hardness machine
4Pendulum impact testing machine
5Spring testing machine
6Deflection of beam apparatus and its dial guage
7Electrical resistance guage
8Cantilever beam setup
9Cantilever beam magnetic dial guage holder
10Continuous beam setup
11Continuou beam magnetic dial guage holder
12Beam setup for maxwell theorem verification - Setup
13Magnetic dial guage holder for maxwell theorem verification - Setup
Metro Project Financial Status
Pranahitha chevalla lift irrigation Bhuvanagiri
Workshops on Analysis & Design of Structures
Workshops Structural engineering concepts
Counselling Code
NNRG Counselling Code
Print Friendly, PDF & Email

© Copyright 2016 Nalla Narasimha Reddy Education Society’s Group of Institutions - Integrated Campus. All Rights Reserved. Crafted by www.teachershive.com

Google 360 - College View